2.4 Ghz to 3.5 Ghz conversion

Dear All,

I have wireless network in 3.5 G Hz using Alvarion Breezemax. Now i want to connect some 10 antennas which are in 2.4 G Hz in my network. Some one suggested me to use Teletronics UDC 3500 up down converter.

My question is, did any one used this? and how is its performance?

Also other ways to mix 2.4 G Hz Antennas in 3.5 G Hz network?

Any suggestion in this regard is highly appreciable.

Thanks in Advance,

Krishna.

You want to put an antenna tuned for 2.4Ghz on a device that operates at 3.5Ghz? Why?
If the network is operating at 3.5Ghz then your 2.4Ghz antennas will not work, sell them and buy antennas tuned for 3.5Ghz. If you have a sweep generator and a network analyzer then you could re-tune the antennas, ($10-30K). but unless you do this for a living, it is quite a challenge, so save yourself a whole lot of frustration and just go buy the proper antennas/equipment. The Transverters (up/down converters) are to convert a 2.4Ghz device to operate at 3.5Ghz and it will only work if the 3.5 Ghz radio is using the same modulation and protocol as the 2.4Ghz one.

Good luck

Hi

Thanks for your suggestion. Let me look at this option too.

Any how thanks a lot,

Krishna